AFG 3.0 AT SERIES Bedienungsanleitung Seite 101
- Seite / 145
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
REMOTE INTERFACE
99
This means that the magnitude of the DC offset is
determined by the output amplitude.
If the specified DC offset is out of range, the
maximum/minimum offset will be set instead. A
―-222‖ error will be generated from the remote
terminal.
SOURce[1]:APPLy:SINusoid
Set
Description
Outputs a sine wave when the command has
executed. Frequency, amplitude and offset can also
be set.
Syntax
SOURce[1]:APPLy:SINusoid [<frequency>
[,<amplitude> [,<offset>] ]]
Parameter
<frequency>
0.1Hz~25MHz*
<amplitude>
1mV~10Vpp (50Ω)
<offset>
-5V ~ +5V (50Ω)
*AFG-2005/2105 limited to 5MHz, AFG-2012/2112
limited to 12MHz.
Example
SOURce1:APPL:SIN MAX, 3.0, -2.5
Outputs a 3Vpp sine wave at 25MHz (max
frequency) with a -2.5V offset.
SOURce[1]:APPLy:SQUare
Set
Description
Outputs a square wave when the command has
executed. Frequency, amplitude and offset can also
be set. The duty cycle is fixed to 50%.
Syntax
SOURce[1]:APPLy:SQUare [<frequency> [,<amplitude>
[,<offset>] ]]
Parameter
<frequency>
0.1Hz ~ 25MHz*
<
amplitude
>
1mV~10V (50Ω)
- Arbitrary Function Generator 1
- Table of Contents 3
- SAFETY INSTRUCTIONS 5
- Safety Guidelines 6
- Location: Indoor 8
- SAFETY INSTRUCTIONS 9
- GETTING STARTED 10
- Panel Overview 12
- Save/Recall 13
- MOD input 16
- Trigger input 16
- MOD output 16
- Mini USB portPower socket 16
- Counter input 16
- Display 17
- AFG-2125 19
- QUICK REFERENCE 21
- ARB keys 22
- Function keys 22
- Selecting a Waveform 24
- ARB - Points 26
- Modulation 27
- Sweep (2100 series only) 31
- Counter (2100 series only) 33
- Default Settings 35
- 0.00Vdc 35
- OPERATION 37
- Select a Waveform 39
- Setting the Frequency 39
- Setting the Amplitude 40
- Setting the DC Offset 41
- 0% 50% 100% 43
- Amplitude Modulation (AM) 44
- (AFG-2100 Series) 44
- Selecting AM Modulation 45
- AM Carrier Waveform 45
- Frequency Modulation (FM) 52
- Selecting FM Modulation 53
- FM Carrier Waveform 53
- OUTPUT INPUT 60
- Hop Frequency 61
- Carrier Frequency 61
- Selecting FSK Modulation 62
- FSK Carrier Waveform 62
- FSK Carrier Frequency 63
- FSK Rate 66
- FSK output 68
- Frequency Sweep 69
- Start/Stop 70
- Sweep Mode 72
- MOD Counter 74
- Trigger MOD 74
- Sweep output 75
- Selecting the Gate Time 79
- Using the SYNC Output Port 80
- ARB output 81
- SYNC output 81
- AM output 82
- REMOTE INTERFACE 86
- REMOTE INTERFACE 87
- Command Syntax 89
- SOURce1:DCOffset 91
- NRf+ type 93
- Command List 95
- System Commands 97
- Status Register Commands 98
- Apply Commands 99
- for each function 99
- Output Frequency 99
- is limited 100
- 100
- SOURce[1]:APPLy:SINusoid 101
- SOURce[1]:APPLy:SQUare 101
- SOURce[1]:APPLy:RAMP 102
- SOURce[1]:APPLy:NOISe 102
- -5V ~ +5V (50Ω) 103
- Query Example 104
- Output Commands 105
- SOURce[1]:FREQuency 106
- are related by the 108
- SOURce[1]:DCOffset 109
- SOURce[1]:SQUare:DCYCle 109
- SOURce[1]:RAMP:SYMMetry 111
- SOURce[1]:OUTPut:SYNC 112
- SOURce[1]:VOLTage:UNIT 113
- AM Overview 114
- SOURce[1]:AM:STATe 115
- SOURce[1]:AM:SOURce 115
- SOURce[1]:AM:DEPTh 117
- FM Overview 118
- SOURce[1]:FM:STATe 118
- SOURce[1]:FM:SOURce 119
- SOURce[1]:FM:DEViation 121
- The carrier 123
- SOURce[1]:FSKey:SOURce 124
- SOURce[1]:FSKey:FREQuency 124
- Frequency Sweep Commands 127
- SOURce[1]:SWEep:STATe 128
- SOURce[1]:FREQuency:STARt 128
- SOURce[1]:FREQuency:STOP 129
- SOURce[1]:SWEep:SPACing 130
- SOURce[1]:SWEep:TIME 130
- SOURce[1]:SWEep:SOURce 131
- Arbitrary Waveform Commands 132
- Alternatively, the 132
- SOURce[1]:FUNCtion USER 133
- DATA:DAC 133
- Save and Recall Commands 135
- APPENDIX 137
- APPENDIX 139
- EC Declaration of Conformity 143
- INDEX 145
Verwandte Produkte und Handbücher für Laufbänder AFG 3.0 AT SERIES
Laufbänder AFG 5.1AT Bedienungshandbuch
(38 Seiten)
(38 Seiten)
Laufbänder AFG 3.0 AT SERIES Spezifikationen
(232 Seiten)
(232 Seiten)
Laufbänder AFG 5.1AT Bedienungshandbuch
(59 Seiten)
(59 Seiten)
Laufbänder AFG 13.0 AT Betriebsanweisung
(36 Seiten)
(36 Seiten)
Laufbänder AFG 2.0AT Betriebsanweisung
(36 Seiten)
(36 Seiten)
Laufbänder AFG 3.0 AT SERIES Betriebsanweisung
(40 Seiten)
(40 Seiten)
Laufbänder AFG 1.0AT Betriebsanweisung
(32 Seiten)
(32 Seiten)
Laufbänder AFG 3.0 AT SERIES Betriebsanweisung
(20 Seiten)
(20 Seiten)
Laufbänder AFG 3.0 AT SERIES Bedienungsanleitung
(145 Seiten)
(145 Seiten)
Laufbänder AFG 5.3AT Bedienungshandbuch
(39 Seiten)
(39 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.161 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern